|Over the next 18 months, Becht and his team, Grant Becht and Brian Bartholome, made slow-but- steady progress rebuilding the tank. The 7-ton machine had very few original parts, and no blueprints.
“Most of the parts were built or recreated from pictures, but that’s what we pride ourselves on—building what was lost to history,” Randy Becht said.
When it came time to build custom springs, however, progress came to a halt—until Becht contacted Mike Eaton at EATON Detroit Spring.
“Randy sent a rather vague email asking if we could build four springs to special specs,” Eaton said. “Because he could not give much information, I was afraid we would not be able to help him. But once he said the spring was for Gen. Patton’s tank, I knew we would make it happen.”
Becht explained that the importance of the spring setup was unexpected—without the right rates and specs, the tank not only wouldn’t sit right, it wouldn’t function properly, either.
“What we started with was flawed,” he explained. “EATON Detroit Spring came in and saved the day. They not only corrected 100-year- old flawed engineering, but improved it greatly.”
To create something that would work, Eaton’s first steps were to ask the questions needed to build the custom tank springs, including:
“Randy gave me what he could and mentioned a couple of weak points that he saw in the original design,” Eaton recalled. “Then I went to work.”
Calling on his 40-plus years of spring-building experience, Eaton created a design he believed solved all the problems, including a way to make a quick correction if needed.
“Randy installed the springs and called me happier than a kid in a candy store,” he said. “The tank sat perfectly.”
It was one of those projects where talented individuals come together to create something special.
“Randy is an extremely talented man,” Eaton said—though Becht is quick to share the accolades.
“Without the dedication and charity of industry leaders like Mr. Eaton and others, we would not be able to do the things we do,” Becht stated. “We thank God for our ability to do what we love and to bring happiness to museum patrons everywhere we send our creations.”
Those creations are delivered to institutions all over the United States, with additional collaborations beginning with several European museums next year.
As for Patton’s WWI tank, it was dedicated November 2, 2017, received by George Patton Waters, Gen. Patton’s grandson and fellow veteran. It is now on permanent display at the Indiana Military Museum in Vincennes, Indiana.
- The length of the area the springs would fit into;
- The distance from the center bolt location to the center of the spring eyes, both front and rear of the spring;
- Maximum width allowed;
- Distance between the bottom mounting plate of the springs and the center line of the eyes when the springs would be loaded with the weight of the tank;
- The weight the springs would be supporting;
- And how the weight would be distributed front and rear.